Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble

Marsblade

Members+
  • Content Count

    103
  • Joined

  • Last visited

  • Feedback

    0%

Community Reputation

22 Good

Equipment

  • Skates
    True
  • Stick
    Warrior
  • Hockey Bag
    Bauer

Profile Information

  • Gender
    Male
  • Spambot control
    123456789

Contact Methods

  • Website URL
    http://www.marsblade.com
  • Twitter
    marsblade
  • Instagram
    marsblade

Recent Profile Visitors

4512 profile views
  1. Nice! Just make sure to test the different inserts as they feel very different. Some guys forgets this. Make sure to challenge yourself in turns, crossovers and trusting the edges more than normal. Also, possibly going for a less sharp hollow as the more steel on the ice will help you with more bite. Some guys feel it too much bite with the same hollow. Less sharp is of course better for glide. //Per
  2. The rocker movement is much more subtle on the I2s vs the O1s as they are designed for performance vs the O1s that are designed for training. The I2s only have the rocker in the back part, the front is rigid to provide firm support when pushing off. You are still able to get a significant rocker movement with the I2s but there's always that stability in the front, so that's a significant difference between the two. Let me know if you want me to elaborate or if you have other questions. //Per
  3. Hey man, Great questions! The O1 has an H4-T4 rocker radius. There's currently not that exact option for R1. H5-T8 would be the closest. But there's stuff cooking here so at Marsblade so stay tuned for updates in this area during the year 😉 //Per Mars
  4. Yes, they operate differently. The spring is located in the front to create resistance when rocking back and pull the blade back into it's neutral position when lifting the skate up from the ice. You will need to mount the holder to the boot to get the full stiffness of the holder and see the system work properly when the blade / quick release mechanism is attached. Then you'll see that as you press down the heel you'll get the rocker. The old holder was in carbon fiber and was really stiff without being mounted to the boot but had some challenges in it's design. By making it in plastic we could overcome all the challenges but then it needs the stiffness of the boot to be stiff enough. If you want to feel the rocker before the holder is mounted to the boot you'll need to release the blade from the quick release and then rock. Hope this explains it. //Per
  5. @CBnCO Hi, Good thoughts. How the steel interacts with the ice is not largely effected with Flow Motion Technology. All guys that currently are on them I'd say use the same profile as they have with the regular holders. What FMT does is that it allows for the steel to stay on the ice longer for better glide and power transfer while you get better maneuverability for better agility. So regardless of profile, FMT will give you the best of both worlds. What a lot of guys do feel is that they can go for a more shallow hollow since the steel stays on the ice longer. This is very positive of course since a more shallow hollow will give you better glide and endurance. So you do need to profile the steels, but no worries on needing to experiment a lot, just use the same profile and it will work awesome. //Per Mars, Inventor
  6. @PBH The I2 is so much better in all aspects, completely different product in my eyes. We currently have about 10 NHL guys on them. Pretty much all NHL guys that has tried them has continued to use them and loves the feel and performance. //Per Mars, Inventor
  7. Hey, The sizing chart refers to Bauers chart. They have different size holders on the half size skates, so a 6.5 D uses a 254 while a 6.5 EE uses a 263. Hope that makes sense. Holes lines up with the TUUK. //Per
  8. @Westside @Miller55 We want to keep the fit of the lower and upper chassis as tight as possible to get the best possible stability. Unfortunately the visible wear is therefore hard to avoid but as I think you indicate @Westside it's only aesthetic. Hope that makes sense. //Per Mars, Inventor
  9. @ivani Ok, that's what I thought. Although you get better maneuverability than with a straight setup, the downside of rockering the wheels with smaller front and rear wheels is of course that you get less stability and grip to the surface. It also gets a bit "choppy" since the rocker is more "on and off" between the different positions. With our Flow Motion Technology you get a much smoother rocker movement and weight transfer for better feel, power transfer and roll on the wheels. If you use our Standard (straight) wheel setup and want more maneuverability we suggest our Advanced setup with a smaller front wheel in addition to our technology. You could of course also put a smaller rear wheel also (as in the banana setup) but my personal opinion is that you get too much movement and lack of stability. //Per
  10. Hi @ivani, When you're turning the weight on the wheel base shifts back and puts more pressure on the back wheels than the front wheels. Since the wheels are soft the rear wheel can even be pressed down enough so the front wheel can even lift off the ground allowing you to turn. The rocker makes it easier and more natural to shift the weight along the length of the foot and easier to put more heel pressure for easier turns. When you say banana rocker, what do you mean? //Per
  11. Hi guys, Yes Bauer and Mission skates/chassis are definitely more common than our R1 chassis right now. But keep in mind that we're introducing a new technology to a conservative market and it's takes time to break through. Bauer / Mission and other roller hockey brands have been out on the market for many many years and we launched our chassis less than one year ago. You will start seeing more and more R1s going forward and in a few years everyone will be using Flow Motion Technology 🙂 As far as durability, we've just recently changed the material in the plastic and are confident we have solved any issues with them breaking. //Per, Inventor
  12. Are you sure that you have 76 in the back on your current jr frames? I haven't seen anything else than a 72/68 setup on Hi/lo jr skates. //Per
×
×
  • Create New...